We were closed in August and part of July for remanufacturing circuits and new engines. Normally the site posted a warning message with lack of access to the buttons Paypal. But some customers have ordered anyway by the fact that they could load  an old version of the site from the cache on their local disk (temporary Internet files). As a result their order has not been executed and will soon now in the order of commands. On the remanufacturing, most circuits' hand made 'are now fitted to the machine in reflow soldering, which gives greater reliability and lower the price of 50 to 75%. The differences for those who have ordered in August will be reimbursed or have (but not for orders oldest). 

PRODUCT

AVAILABILITY

old price

new price

VARBL2 

thick circuit 1.6g bare board

now

 45 E

15 E

VARBL2 

thin circuit  1.1g bare board

now

 45E

25 E

RX V2.6 JST

3 weeks

 50E

25 E

VARBL1

6-8 weeks

 45 E

20 E

VARBL3

2 monthes

 35E

20E

For BL motors  EM6 and  EM8 don't change  a new 4g good performances ( 15E) andnew 5g to  9g 

( 20 to 25 E)

 

 

 

1 month 

1 à 2 monthes

 

 

                           

         

                        

                    

         

          

           

                  

            

               

 

Low cost quality  micro brushless available 

                            30 E ttc 

 

A 6g and a 8g model available (in stock) 

Designed in france. 

All details in motor page.

 Our new brushless controler: the VARBL3 

More compact than Varbl2: 24x11mm 

1.5g bare board  2.2g wired 

Multilayer circuit for higher stability and more power available: 6A continuous, 8A pulsed 

1-3 lipoly. Configurable by optional circuit 

4 preset config. usine tunable by screw. BEC 1A. 

The best companion four your micro brushless motors 

for 35E