RECEIUERS
|
ARTICLE
|
PHOTO
|
COMMENT
|
PRICE
|
|
receiver V2.5 with JST connectors
|
|
Quality micro receiver with JST connectors. Includes now optional signal analyser and fail safe.
1.9g high range > 300m (up to 700 @ 35 mhz)
high selectivity > 10 khz shift - (shift + optional)
Ideal to go with micro brushless.
Leaded or smd crystal 35 to 41 or 72 mhz.
|
25€
stock 400
|
|
receiver V2.5 for conventional servos
|
|
Same Rx without JST 1.4g with smd crystal
35 to 41 or 72 mhz 2.5V to 16V
Leaded or smd crystal
high range
excellent selectivity < 10 khz
|
25€
stock 100
|
|
combo receiver V2.5
for magnet servos
|
|
Combo receiver narrow band < 10 khz
FM PPM shift -
weight 1.8g 1 cell or multicell version. High selectivity. Suitable with commercial Tx. 150m to 200 m range 2 actuators + one 1.5A ESC Leaded or smd crystal 35 to 41 or 72 mhz.
end of stock
|
out of stock
|
|
combo receiver MPS V1.5
|
|
ultra light new wide band receiver
(0.9g with smd crystal and antenna, 12x19mm)
2 amplifiers for magnet servos and one 1.5A integrated ESC
Smd crystal only, 41.180 72.450 or 35.160 mhz
|
out of stock
|
|
optional modul
|
|
gives 3 chanels more for combo Rx
(1 ESC + 2 magnet servos)
around 100mg
|
20€
|
|
micro combo
0.25g
|
|
An AM 1/4g version of the combo 11.3 x 7.7mm Esc for 4mm pager motor + 2 magnet servos outputs range: a gymnasium.
|
|
The Combo (narrow band) and receiver:
RX & Combo V2.x narrow band
Receiver and combo receiver version 2.5 available
35 mhz to 41 mhz and 72 mhz. all chanels
Features of receivers:
Combo is for magnet servo: esc (1.5A 3A max) + 2 magnet servo. Second esc + 2 extra servo optional. A version esc + 4 outputs for traditionnal servos possible on ask.
Rx: 5 chanels for conventional servos. JST connectors on ask.
- Narrow band 10 khz. Excellent selectivity with two 50 mg smd high performances filters.
- integrated ESC 3khz 1.5A
- 300m range for the receiver at ground level motor running
Combo has 140 to 200m range.
- Available in light version and standard version.:
light version: Rx 1g combo 1.3g with soldered smd crystal & antenna
standard: add 150mg + weight of removable commercial crystal
- all chanels available in standard version, some only in light version.
- work either with 1 lipoly or with 2-3 Lipoly
( 16V version on ask, no weight penalty but 30% torque penalty on magnet servos)
- Esc + 4 output for conventional servos on ask
- US reseller: David Lewis. (www.homefly.com)
Michael Cripps (www.eflightdesigns.com)
E-mail for europe.
The Combo V1 (wide band):
The whole RC on one circuit for 0.9g (with crystal and antenna) !
Receiver + ESC + 2 boosted magnet servo controlers.
70mg smd crystal and micro inductor.
only one pic12c672 rather than 4 12c508 before (rx + esc + 2 magnet servo controlers) This one allows a protection against glitches: the last good pulse is available until a new good pulse is found.
frequency 4 khz for esc and servos.
sensibility: 50 positions for esc and 2x25 for servos.
servo control boosted by mosfet. 0.5A continuous, 1.5A pulsed. This is more than needed for the15 to 40 ma drawn by the coil generally. This gives an optimal power, the best on the market actually. Even the standard BIRDs actuators seem powerfull. Possible to supply pager motors for helicopters or balloons.
Esc can draw up to 3.2 A (no BEC)
A set of capacitors filtering complementary frequencies ensure stable voltage.
72 mhz version available for less than $100. (CH33 72.450)